乐从钢材批发市场海蓝色彩钢板 钢结构建筑楼承板压型钢板

什么是钢结构建筑楼承板压型钢板？

What is the steel structure building building bearing plate pressure type steel plate?

压型钢板是指在连续式机组上将涂层板或锁层板经棍压冷弯，沿板宽方向形成的波形截面成型钢板，适用于建筑物围护结构（屋面、墙面）及楼盖楼承板等部位的各类波型板。

Pressure steel plate refers to the coating plate or locking plate forming steel plate formed along the direction of the wave section of the plate width, suitable for the building envelope structure (roof, wall) and building bearing plate and other parts of the wave plate.

建筑用压型钢板分为屋面用板、墙面用板与楼面用板三类，其型号由压型代号用途代号WC 屋面用）、(墙面用）、楼面用）及板型尺寸数值（波高与板宽）组成。佛山万庆屋面用压型钢板波高为51mm、覆盖宽度760mm，其型号为 YW51-760。

The pressed steel plate for building is divided into three types of roof plate, wall plate and floor plate. The model is composed of the press code name WC roof), (wall), floor) and plate size value (wave height and plate width).The pressure steel plate for Foshan Wanqing roof is 51mm and the covering width is 760mm, and its model is YW51-760.

基板与涂层板均可直接棍压成型为压型板使用，热锁基板彩涂板的锁层质具有涂层耐久性，建筑用压型钢板不应采用电镀锌钢板或尤任何锁层与涂层的钢板及钢带。

Substrate and coating plate can be directly pressed molding for pressing plate, hot lock substrate color coating plate locking layer has coating durability, building pressure steel plate should not use galvanized steel plate or especially any locking layer and coated steel plate and steel strip.

压型钢板自身重量轻、强度高、承重大、抗震性好的特点，工程中作为混凝土楼板的永久性模板，其设计的钢板肋在使用阶段起代替板底部分钢筋的作用方便施工、节约成本、且与混凝土具混凝土粘结强度，提升结构的承载能力。适用于钢结构与混凝土楼板组合的结构工程，特别适用于楼层较高、面积较大、不适宜搭设满堂脚手架体系的建筑。

Pressure steel plate itself light weight, high strength, bearing, good seismic resistance, the project as the permanent template of concrete floor, the design of the steel plate ribs in the use stage instead of the bottom part of the reinforcement convenient construction, cost saving, and concrete concrete bonding strength, improve the carrying capacity of the structure.Suitable for the combination of steel structure and concrete floor structure engineering, especially suitable for higher floors, large area, not suitable for the full hall scaffolding system building.