找回密码
 立即注册

乐从钢材批发市场代加工家电彩涂钢板DX51D/53D镀锌彩涂板开平分条 ...

1260人阅读 2023-3-11 14:37

佛山市万庆物资有限公司位于广东钢材批发市场---顺德乐从,是一家集钢铁销售、加工、配送于一体的钢贸企业。我们与专业的钢材加工工厂合作,为客户提供代加工服务分别有:

Foshan Wanqing Materials Co., Ltd. is located in Guangdong steel wholesale market- -Shunde Lecong, which is a steel trade enterprise integrating steel sales, processing and distribution. We cooperate with professional steel processing factories to provide customers with OEM processing services respectively:

1、分条:按客户要求将大条分小条,如0.5*1000*C,用宽度1000mm可以分成1000mm以内的规格。

1、Section: according to the customer requirements, the large and small sections, such as 0.5 * 1000 * C, with the width can be divided within 1000mm into 1000mm specifications.

2、开平:卷板剪成平板,即将一卷钢板,剪成一件长方形或正方形的平板,或大件板剪成小规格的板。

2、Kaiping: the rolling plate is cut into a flat plate, namely a roll of steel plate, which is cut into a rectangular or square flat plate, or a large plate is cut into a small size plate.

3、分卷:大卷分小卷,规格不变。

3、Volume: large volume into small volume, specifications unchanged.

4、飞边:去掉卷板的毛边

4、Flying edge: remove the wool edge of the coil board.

5、重卷:又称回卷。一卷打开了的板再卷起来一般是打开看看板有没质量问题

5、Revolume: also known as back volume. A roll of open board to roll up, generally open to see if the steel plate has no quality problem.

6、纵剪:剪边针对的是平板

6、Longitudinal shear: edge cutting, for the plate.

7、平直:不平的板搞平

7、Flat straight: uneven board make flat.

还有粗加工:冲压、折弯拉伸,像脸盆之类的凹件是深冲

There are rough machining: stamping, bending and stretching, like a washbasin and other concave is deep flush.

黑色烤箱外壳是以DX51D或DX53D镀锌板为基板的亚光黑、磨砂黑、高光黑彩涂板,颜色、纹路可以按客户所需定制。

Black oven shell is DX51D or DX53D galvanized plate as the substrate of matte black, matte black, highlight black color coating board, color, grain can be customized according to customer needs.

彩涂板加工时有许多与普通钢板不同的地方,由于彩涂板表面有一层涂膜,在经剪切、冲孔、弯曲和连接等加工工序,制成各种不同用途的制品应予以注意,以防加工时涂膜受损而影响产品外观及寿命。

Color coating plate has many different places and ordinary steel plate processing, because the surface of the color coating plate has a layer of coating film, after cutting, punching, bending and connection and other processing processes, made into a variety of different uses of products, should be paid attention to, to prevent the processing of the film damage and affect the appearance and life of the product.

1、剪切加工:应尽可能减少切断面的毛刺,并清除剪切时的金属粉,同时在下面铺上橡皮垫,以防彩涂板在堆垛、加工时损伤表面;

1, shear processing: should reduce the cut surface as far as possible, and remove the metal powder when cutting, at the same time in the following rubber pad, to prevent the color coating plate in the stacking, processing damage to the surface;

2、弯曲加工:加工前应清除冲模、冲床等部件上的污垢和铁锈;加工时的温度最好控制在5摄氏度以上;若进行辊压加工,应用硬质材料制造轧辊(淬火钢、模具钢等)或轧辊表面镀硬质铭;

2. Bending processing: the dirt and rust on die, punch and other parts shall be removed before processing; the temperature during processing shall be controlled above 5 degrees Celsius; if roller pressing, use hard materials to manufacture roll (quenching steel, die steel, etc.) or roller surface;

3、压力加工:进行压力加工时彩涂钢板必须对它的基板和涂层类型加以慎重选择;另外加工时要精心,金属模的表面应特别平滑,根据情况也在彩涂钢板表面贴上保护膜,以保护涂层;

3, pressure processing: during pressure processing, the color steel plate must be carefully selected for its substrate and coating type; in addition, the processing should be careful, the surface of the metal mold should be particularly smooth, according to the situation, the color steel plate surface with protective film, to protect the coating;

4、连接:彩涂板可以进行机械连接、焊接连接和粘接连接,但目前彩涂板的焊接设备与技术工艺尚处于研究实验阶段,尚未成熟,用户应尽量采用机械连接方法。

4, connection: the color coating board can be mechanically connected, welding connection and bonding connection, but at present the welding equipment and technology of the color coating board is still in the research and experiment stage, not yet mature, the user should try to use the mechanical connection method.

5、彩涂板的切口断面保护:在设计产品时,尽量将切口置于隐蔽部分;当使用镀锌板作为基板的彩涂板时,由于锌具有牺牲极对钢起保护作用,一般不必对切口断面作特殊处理。只有那些与药品、腐蚀性气体接触或在其他恶劣环境下使用时,才对切口断面进行保护

5. Cutting section protection of color coating plate: When designing the product, put the incision in the hidden part; When the galvanized plate is used as the base plate, the steel. The cut sections are only protected for those in contact with drugs, corrosive gases or used in other harsh environments.


路过

雷人

握手

鲜花

鸡蛋
原作者: 佛山万庆物资
分享到